Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BM_SB 13-XE.book Seite 14 Montag, 12. April 2010 3:27 15
Maintenance and Cleaning
Before any work on the machine itself, pull the
mains plug.
The ventilation slots of the machine must be kept
clear at all times.
For the replacement of worn out carbon brushes,
spare carbon brushes are stored in the machine.
These are accessible after removing the soft grip 5.
Have the spare carbon brushes replaced only by an
authorised customer service location for Würth elec-
tro-tools.
For all correspondence and spare parts orders,
always include the article number on the type plate
of the machine.
For the current spare parts list of this machine, log
into the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Warranty
For this Würth tool, we provide a warranty in accor-
dance with statutory /country-specific regulations
from the date of purchase (proof of purchase by
invoice or delivery note). Damage that has occurred
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be accepted only when the machine is
presented undisassembled to a Würth branch office,
your Würth sales representative or a customer ser-
vice agent for Würth pessure air and power tools.
Disposal
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical
and electronic equipment and its
incorporation into national law, power tools that are
no longer suitable for use must be separately collec-
ted and sent for recovery in an environmental-fri-
endly manner.
14
Noise/Vibration Information
Measured values determined according to
EN 60 745.
Typically the A-weighted noise levels of the machine
are: sound pressure level:
BM 13-XE:
sound pressure level
(L
)
84 dB(A)
pA
sound power level
(L
)
95 dB(A)
wA
uncertainty
K =
3 dB
Wear hearing protection!
Vibration
Overall vibrational value (vector sum of three direc-
tions) determined according to EN 60 745:
Impact drilling into con-
crete: Vibrational emis-
sion value a
h
uncertainty K =
Drilling into metal: Vibra-
tional emission value a
h
uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a stan-
dardised test given in EN 60745 and may be used
to compare one tool with another. It may be used for
a preliminary assessment of the vibrational impact.
The declared vibration emission level represents the
main applications of the power tool. However if the
power tool is used for other applications, with diffe-
rent accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the vibrational impact over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
Maintain the power tool and the accessories, keep
the hands warm, organisation of work patterns.
SB 13-XE:
101 dB(A)
112 dB(A)
3 dB
BM 13-XE
SB 13-XE
2
–
12.5 m/s
2
–
1.5 m/s
2
2
3.5 m/s
3.5 m/s
2
2
1.5 m/s
1.5 m/s
Publicité
Table des Matières
