Wireless Monitor; System Update - GE 040350 Manuel De L'opérateur

Wireless Monitor

The generator is supplied with a battery-powered, wireless
monitor.
The monitor communicates wirelessly with the generator
control panel. The monitor may be placed in a suitable
location in the home. The system has a line-of-sight range of
about 200 feet, but this distance will decrease if the signal
has to pass through walls or other objects.
The wireless monitor communicates with the generator,
every 10 minutes and will display the status via a green or
red LED light on the front of the monitor.
A
B
C
D
generator ready
generator power
service needed

system update

DEALER NAME
DEALER PHONE
Compare the illustration below with your monitor to
familiarize yourself with these important components.
• Generator Ready
• Generator Power
C
• Service Needed
D
• System Update
with generator.
• Service code descriptions
of flashes are listed on the backside of the wireless
monitor.
• Battery Access Cover
and phone number on the label provided. Once
removed, two non-rechargeable AA batteries are
installed in the compartment
# of flashes service needed
1 low battery voltage 5 low frequency
2 low uid level 6 engine overspeed
3 under/over voltage 7 high temperature
4 engine does not start 8 transfer switch
part #: 316196 fcc id: MCQ-XBS2C IC id: 1846A-XBS2C
A
- Green LED
B
- Green LED
- Red LED
- Press for current system update
E
- Name and number
F - Record the dealer name
G . .
F
E
G
21