Zephyr Breeze I Mode D'emploi page 13

NOTE: Skip the recirculating preparation pages if you are ducting the air out of your home.
An air recirculating kit (optional) must be
purchased before using hood in recirculat-
ing mode.
Recirculating kit - 0AK11-21001
2. Insert charcoal filter into charcoal filter
holder (B) and place it over the safety grille
body (A)
4. Remove each screw from recirculating
top plate. Plate is located on top of hood
towards the front.
1. Secure each of the (2) spring clips to the
safety grille body (A). Do this by inserting
the screw through the spring and into the
clip. Secure each clip to the safety grille
body by using a philips head screwdriver.
3. Secure charcoal filter holder to safety
grill body by lifting up on spring clips and
twisting. The clip should cover the lip of the
charcoal filter holder securely.
Recirculating preparation
continued on next page
11