Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions: Introduction and Overview
The ducted indoror unit is shipped with a wired remote
controller.
The Ducted unit will install above the ceiling or in a
soffit area. It is mounted using threaded rods that fit
into brackets that are located at all four corners of the
Ducted assembly.
The slim duct unit has a built-in condensate pump
and a float switch to avoid overflow situation and
maintaining reliable operation. An insulated condensate
fitting is included in the accessory pouch. This fitting
connects the condensate drain outlet of the unit to the
field-supplied drain piping.
When making refrigerant line connections, always use
the flare nuts provided with this equipment. Refrigerant
line connections should be wrapped with insulating tape
at the slim duct indoor unit to prevent sweating
31-5000099
Ducted Product Information
YR-E17 Wired Controller
See wired controller manual
for more information
7
Publicité
Chapitres
Table des Matières
