Zagg Rugged Book Manuel D'utilisation page 5

WORLD SYMBOL – Toggles between international keyboards (when activated in your
tablet's settings).
FN + BATTERY SYMBOL – Indicates remaining battery life.
FN + BACKLIGHT SYMBOL – Activates your Rugged Book's backlight feature. If you
continue pressing the backlight button, your Rugged Book will turn off.
NOTE: The backlights will automatically turn off after a couple seconds if not being used. Begin typing again to activate them.
TROUBLESHOOTING
If your tablet does not respond to your Rugged Book there may be a simple
explanation such as a dead battery or an unsuccessful pairing. Please use the
following to help troubleshoot your situation. If none of the following solve
your issue, then please contact ZAGG Customer Service and one of our trained
professionals will be happy to assist you.
1. Restart your tablet.
2. Turn your Rugged Book off and back on. You should see the LED illuminate
briefly, if not, charge your Rugged Book.
3. After charging, turn your Rugged Book on. If the LED does not illuminate,
and your keyboard doesn't operate correctly, please contact ZAGG's
customer service.
4. If your Rugged Book cannot establish or maintain a Bluetooth® connection,
reset the Bluetooth module by charging your keyboard.
5. Forget and re-pair your Rugged Book.
6. Push the FN + Pair buttons on your Rugged Book and watch for the LED to
flash blue.
7. Your tablet should display "ZAGG Rugged Book" as an available device.
Select it.
8. If your tablet gives you an error message, repeat the pairing process.
4