Red Hat Enterprise Linux; Windows Installation - PMC adaptec SAS RAID Mode D'emploi

Red Hat Enterprise Linux 6

For Red Hat 5, Red Hat 6 with DKMS support, and other Linux distributions,
refer to the Adaptec RAID Controllers Installation and User's Guide.
a
Insert the Red Hat CD, then restart the computer.
b
When the Welcome screen appears, press Enter at the boot prompt, type
CTRL+ALT+F2
c
Insert the USB driver disk.
d
Assuming the USB drive is /dev/sda1, type the following commands to load
the controller driver:
mkdir /mnt2 /AACRAID
mount /dev/sda1 /mnt2
cp -r /mnt2/* /AACRAID
umount /mnt2
cd /AACRAID
sh ./fc-pre-install.sh
e
Press
ALT+F6
f
Follow the on-screen prompts to continue the installation. When prompted
to reboot the system, press
reboot before completing the next step!
g
Type the following commands to complete the driver installation:
mkdir /mnt/sysimage/tmp/AACRAID
cp -r /AACRAID/* /mnt/sysimage/tmp/AACRAID
chroot /mnt/sysimage/
cd /tmp/AACRAID
sh ./fc-post-install.sh
exit
h
Press
ALT+F6
installation, then reboot.
Step 7 Install maxView Storage Manager
Before installing maxView Storage Manager, ensure that you are logged in with
administrator or root privileges. Any customization files you created using a
previous version of the application are saved and used in the upgrade.

Windows Installation

a
In Windows Explorer or My Computer, change to the directory where the
Windows setup program is located.
b
Double-click the setup program for your operating system version:
setup_asm_x64.exe (64-bit)
setup_asm_x86.exe (32-bit)
to switch to the shell, then select your language and keyboard.
to switch back to the installation screen, then click Next.
CTRL+ALT+F2
to switch back to the installation screen, finish the Linux
to switch to the console. Do not
6