Operation - Cub Cadet 19C70020 Série Manuel D'utilisation

Bagger Usage
NOTE: When both grass bags are full, place the tractor on a firm, level surface, disengage
the PTO, turn the tractor engine off and set the parking brake.
1. First, flip the seat forward.
2. Open the grass catcher hood by pushing in on the rear, right-side tab with your right
hand, as seen in (1) of Figure 39, and lifting the cover with your left hand in the center
rear of the bagger cover (2).
3. Do not remove the chute tube assembly from the tractor.
4. Remove the grass bags by lifting these up (1) and moving the bags away from the bag
support assembly (2). See Figure 40.
5. Empty the grass clippings at a proper disposal site, use the handle at the bottom of
each grass bag. Holding the bag firmly, empty the contents.
6. Replace grass bags, close lid, flip down seat, restart your tractor, release parking
brake and resume cutting your grass.
2
1
Figure 39

OPERATION

2
1
Figure 40
10