Charging The Battery - Audio-Technica ATH-AR3BT Manuel De L'utilisateur

Charging the battery

• Fully charge the battery when using for the first time.
• When the rechargeable battery is running low, the product will sound 2 sets of 2 beeps and the indicator lamp will
flash in red. When these beeps sound, charge the battery.
• It takes about 5 hours to charge the battery fully. (This time may vary depending on usage conditions.)
• While the battery is charging, the product's Bluetooth connection remains disabled and therefore the product's
Bluetooth feature cannot be used.
1. Connect the included USB charging cable (micro USB Type B) to the product's USB connector jack.
Computer
2. Connect the included USB charging cable (USB Type A) to the computer to start charging.
• You can also use a USB-compatible AC adapter (sold separately) to charge the battery by using a power
outlet (charging voltage/current: 5 V
• During charging, the indicator lamp lights as follows:
Lit in red : Charging
Lit in blue : Charging complete
3. When charging is complete, disconnect the included USB charging cable (USB Type A) from the computer.
4. Disconnect the included USB charging cable (micro USB Type B) from the product's USB connector jack.
5
USB connector jack
USB port
USB Type A
USB charging cable
(included)
200 mA).
Micro USB Type B