Publicité
Les langues disponibles
Les langues disponibles
mounting or dismantle parts; Before cleaning or
maintenance work; After use.
12. Only have the appliance repaired by a qualified service
centre.
13. Qualified service center: after-sales service of the
manufacturer/importer, which is qualified to carry out
repair to avoid any kind of danger. In case of problems
please return the appliance to this service.
Electricity and heat
1. Before use, check that the mains power supply voltage is
the same and the voltage is the same as the voltage
indicated on the appliance.
2. Always plug the appliance into an earthed plug socket.
3. Regularly check the power cord for damage.
4. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or is dropped or
damaged
manufacturer or the nearest authorized service agent for
examination,
adjustment.
5. To remove the plug from the plug socket, pull the plug. Do
not pull the power cord.
6. Make sure the power cord does not come into contact
with hot surfaces or steam.
7. Always remove the plug from the plug socket before you
move the appliance.
8. The machine should not be operated by means of an
external timer-switch or by means of a separate system
with remote control.
9. If an extension cord is absolutely necessary, a 10-ampere
cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that
it cannot be pulled or tripped over.
10. To avoid a circuit overload, do not operate another high
voltage appliance on the same circuit.
in
any
manner.
repair
Return
or
electrical
appliance
or
mechanical
to
Publicité
