Specifications; Installation Guide - Black & Decker BPACT12H Serie Manuel D'utilisation

SET UP & USE

SPECIFICATIONS

BPACT12H / BPACT14H
• Unit Dimensions (W x D x H): 17.1" x 13.8" x 28.1"
• Unit Weight: Approx. 61.7 lbs. / 68.3 lbs.
• Electric Requirements: 115V ~ 60Hz

INSTALLATION GUIDE

LOCATION
•
The air conditioner should be placed on a firm floor to minimize noise and
vibration. For safe and secure positioning, place the unit on a smooth, level
floor strong enough to support the unit.
•
The unit has casters to aid placement, but it should be rolled on smooth, flat
surfaces. Use caution when rolling on carpet surfaces. Do not attempt to roll
the unit over objects.
•
The unit must be placed within reach of a properly rated grounded socket.
•
Never place any obstacles around the air inlet or outlet of the unit.
•
Allow 12 inches to 36 inches of space from the wall with window for efficient
air-conditioning.
SUGGESTED TOOLS FOR WINDOW KIT INSTALLATION
•
Screwdrivers (medium size Phillips)
•
Tape measure or ruler
•
Knife or scissors
•
Saw (In the event that the window kit needs to be cutdown in size because the
window is too narrow for direct installation)
Page 9