Installing Batteries And Setting The Clock - Nissei WS-1300 Instructions

circulation, etc., as there may be a difference between the values
measured at the wrist and those measured at the upper arm.
Let a qualified physician interpret your blood pressure readings.
Depending on your age, weight and general condition, blood
pressure can be slightly different. Consult with your doctor on
determining what blood pressure is normal for you.
Before taking blood pressure, rest for approximately five
minutes and take your blood pressure while relaxed in a
quiet environment.

INSTALLING BATTERIES AND SETTING THE CLOCK

1. Remove the battery cover in the arrow direction, lightly pressing
its sides.
2. Install two AAA alkaline dry cells in the battery compartment,
giving attention to their polarity.
The cells can be easily installed by pushing them while pressing
their (-) end against the spring.
3. Replace the battery cover.
Do not force the battery cover into position.
TIPS ON TAKING YOUR BLOOD PRESSURE
Measure blood pressure using the correct posture and do
not move nor speak during measurement.
Avoid exercise, eating, drinking alcohol, smoking and
other activities that affect your blood pressure right
before a measurement.
Take your blood pressure at the same time every day.
The ambient temperature should be approximately 20˚C
when you take your blood pressure.
4. Year flashes on the display.
Clock can be set only after the batteries are reinstalled.
Setting the clock correctly ensures storage of the
measurement with the correct date and time.
Use memory M1 button to increase the flashing year and
memory M2 button to decrease the year. Press POWER BUTTON
to confirm and move to next step.
5. Month flashes. Adjust with M1 and M2 buttons and press POWER
-12-
Fig.2 page 4