HP Pavilion Serie Mode D'emploi page 30

mb5ltvsh.book Page 20 Monday, June 27, 2005 1:58 PM
Connecting two or more i.LINK devices
Up to 16 i.LINK devices can be connected using a
daisy-chain connection with i.LINK cables.
When 3 or more i.LINK devices are connected, branch
connection can be used. With branch connections, up
to 62 i.LINK devices can be connected.
Cautions regarding i.LINK connection
Use S400 type i.LINK cables.
■
Some i.LINK devices may not relay data if their
■
power is off. In this case the device should be
connected at the end of any series of connections.
This TV can relay data during power off, by
■
selecting Active in the Standby Mode option in
i.LINK Setup menu. See "Setting the standby mode
(i.LINK)" on page 37.
20
HP Pavilion LCD HDTV User's Guide
Do NOT use a loop connection as shown in the
■
diagram.
When using i.LINK, do not turn off the power of or
■
pull the cable from i.LINK devices, even if those
i.LINK devices are not in use. This may affect the
picture and the sound from an i.LINK device
in use.
If devices such as a DVD recorders, digital video
■
cameras, PCs, and PC peripheral devices that are
not compatible with this TV, are connected to the
TV using i.LINK, other i.LINK connections may be
disrupted.
When device recognition, control, recording, or
■
playback, on an i.LINK connected device does not
function correctly, correct operation may be
restored by disconnecting and reconnecting the
i.LINK cable.
When connecting multiple i.LINK devices,
■
depending on the specifications and the
interoperability of the connected devices, their
operation may not be stable.
In that case, disconnecting all devices not in use
and changing the method of connection may
result in stable operation.