Cleaning And Maintenance - Young Living Feather the Owl Mode D'emploi

Cleaning and Maintenance

Always turn off and unplug the diffuser prior to cleaning. To ensure proper
performance, clean the ultrasonic plate and lid after each use. If essential oil
begins to build up on the ultrasonic plate, gently wipe it off using a cotton
swab dipped in rubbing alcohol. If essential oil begins to build up on the
lid, gently wipe it clean using only mild soap and water. Never use corrosive
detergents to clean the ultrasonic plate or damage will occur. Periodically
check under the diffuser to keep the fan intake free of debris. Debris can be
removed by blowing on the fan intake opening or wiping with a clean, dry
cloth. Do not use aerosol sprays, solvents, or abrasives to clean the plastic
housing. When not in use, clean the diffuser and store dry.
Troubleshooting
Issue: When switched on, the diffuser does not operate.
Potential causes: power connection issue, water above water fill
line marker
Issue: There is no mist or less mist than usual.
Potential causes: water above fill line, oil buildup on ultrasonic plate,
ultrasonic plate has stopped working, fan vents or mist spouts are
obstructed, fan is not working
Feather The Owl Diffuser Manual V2_US.indd 11
• Check that the adapter is securely plugged into the wall socket and the
bottom of the diffuser.
• Confirm that there is water in the reservoir and that it does not go above
the fill line marker. If there is too much water, unplug the unit and adjust
the water level, then restart. The light should come on, and the diffuser
should mist.
X
11
6/21/19 10:50 AM