Publicité
CAUTION
• Do not use this cleaner on anything other than
rated voltage.
It may cause fire and unrepairable product damage.
• If the product is not in use for a long period of time,
pull out the power plug.
• Static Electricity may be generated at main body
during the cleaning.
Cleaner may malfunction due to electrostatic energy, so
pull out the power cord and put it back in again.
• Big objects such as socks, stocking, tissues, etc.,
may block the inlet during the cleaning, so please
remove them before starting the cleaning.
This appliance must be used to remove dust only.
• Do not place anything else on the sterilizer station
other than this appliance.
Close proximity of magnets or other active
electromechanical appliances to the sterilizer station can
cause malfunction.
• Do not stop on one spot or use it on the same spot
repeatedly for a long time.
The surface may be damaged by the friction and
vibration.
• Do not touch the bottom surface with hand or foot
while the appliance is in operation.
• Do not operate the appliance without the dust bin
and its covers in place. Always ensure the dust bin
is cleaned when it reaches its limit or beforehand.
If it is used continuously while dust bin is full, it will
cause malfunction and overheating.
6
IMPORTANT SAFETY INSTRUCTIONS
• To avoid the risk of fire or electric shock, always
grip it from the plug when removing. And never pull
on the power cord when removing it from the wall
socket.
• If a foreign object is attached to the bottom surface
of dust bin, remove it before using the product.
It could compromise the suction motor and cause
malfunction and damage.
• Make sure to secure the bottom plate during the
cleaning of bedding items. Do not use the appliance
on a solid surface or flooring. Doing so could cause
damage to both the surface and to the appliance.
• Do not store the appliance or the UV station in an
outdoor environment.
• Never use the product for removing toxic gases.
The product may fail, and toxic gases are not removed.
• Use or place the unit on a level area and do not
apply force to the unit.
Doing so can cause fire or product failure.
• Dispose the product right way.
There is a risk of fire and explosion.
Publicité
Chapitres
Dépannage
