Télécharger Imprimer la page

Using The Sterilization Station (Sterilization And Charging); Utilisation De La Station De Stérilisation (Stérilisation Et Chargement) - LG VH95 DSW Série Manuel D'utilisation

Publicité

How to use
Instructions d'utilisation
OFF
ON
1
➊ The plug of sterilization
station must be plugged
into outlet to use the
sterilization station.
➊ La prise de la station
de stérilisation doit être
branchée sur une prise
afin d'utiliser la station de
stérilisation.
※ If you do not use the cleaner for a long time, turn off the switch to reduce battery discharge.
※ Si l'aspirateur n'a pas été utilisé pendant une période prolongée, éteignez l'interrupteur pour réduire la décharge
de la batterie.
14

Using the Sterilization Station (Sterilization and Charging)

Utilisation de la station de stérilisation
(Stérilisation et chargement)
2
UV lamp status display
Affichage du témoin de la lampe UV
➋ When the product is correctly
placed on the sterilizer station,
a blue indicator lights on the
UV lamp status screen and
the UV lamp starts operation
for sterilization. The indicator
and the UV lamp are turned
off 5 minutes after placing the
product on the sterilizer station,
and sterilization stops.
➋ Lorsque l'appareil est
correctement placé sur la
station de stérilisation, un
témoin bleu s'allume et la lampe
UV démarre le processus de
stérilisation. Le témoin et la
lampe UV s'éteignent 5 minutes
après l'installation de l'appareil
sur la station de stérilisation. La
stérilisation est terminée.
3
Battery fully charged
Batterie entièrement chargée
➌ 5 minutes later the UV lamp and UV
lamp status display automatically turns
off at the same time. Then, sterilization
operation is complete and the product
will be charge state. You can check
the battery level through battery level
indicator. When charging is completed,
the battery level indicator will be turned
on completely. The switch must be
turned on in order to charge the product.
➌ Le voyant d'alimentation et la lampe
UV s'éteindront automatiquement 5
minutes plus tard. Ensuite, l'opération de
stérilisation sera terminée et le produit
rechargé. Vous pouvez vérifier le niveau
de la batterie grâce à l'indicateur du
niveau de batterie Une fois la charge
terminée, l'indicateur du niveau de
batterie s'allumera complètement.
L'interrupteur situé à l'arrière doit être en
position Marche pour pouvoir charger
l'appareil.

Publicité

loading