Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
18
Boiling
1.
Place the rack in the cooker.
2.
Fill the food into jars and close the jars.
3.
Stack the jars on the rack as shown in the illustration.
Note: For smaller glasses, more glasses will fit into the device.
4.
Fill the cooker with enough water to cover the highest glass of 3⁄4 with water.
Do not exceed the maximum mark.
5.
Put on the lid and turn on the main switch (ON). Please note that a timer must
be set for the appliance to start heating. Depending on the fill level and target
temperature, this can take up to 90 minutes. As soon as the set temperature is
reached, the appliance automatically switches from heating mode to warm-
keeping mode.
6.
Then set the temperature and time according to the cooking table. The time
indicated there applies from the point at which the target temperature is
reached. The timer does not take into account the lower temperature during
the warm-up time due to the design.
Publicité
Chapitres
Table des Matières
