Care And Maintenance - Nissei DS-400 Manuel D'instructions

ERROR SYMOL / SYMPTOM
The power
automatically turned off.
If you cannot get correct measurement with the methods above, do not tamper with the internal mechanism.
Contact your dealer. If the unit malfunctions, please return it to the dealer or an authorized service representatives
for service according to the warranty.

CARE AND MAINTENANCE

Because the unit includes precision parts, care should be taken to avoid extreme
temperature variations, humidity, shock, dust, and direct sunlight. Do not drop or strike
the unit. Make sure not to expose the unit to moisture. This unit is not water
resistant.
Use only a soft, dry cloth to clean the unit. Do not use gasoline, paint thinner, or other
strong solvents on the unit. Since the cuff may absorb perspiration and other fluids,
inspect it for stain and discoloration after each use. When cleaning the cuff, do not
machine wash or scrub it. Use a synthetic detergent and gently rub the surface. Make
sure fluid never gets in AIR HOSE. Air dry throughly.
When storing the unit, do not place heavy objects on it and do not coil AIR HOSE too
tightly. When the unit has been stored at a temperature below the freezing point, keep
it for at least 1 hour in a warm place before using it. Remove the battery if the
instrument is to be stored for an extended period of time. Keep the batteries out
of reach of children.
We suggest that you have your blood pressure monitor checked every 2 years. This
operation may only be performed by the manufacturer or by firms authorized by the
manufacturer.
Do not inflate the cuff when it is not wrapped around your arm.
Do not disassemble or modify the unit.
CAUSE / CHECK POINT
is Have you
instrument untouched after
the measurement?
ERROR DISPLAYS AND TROUBLESHOOTING
REMEDY
This does not indicate a
left the
problem.
automatically turns off 3
minutes after a measurement
or 5 seconds after memory
display.
- 15 -
The instrument