Remington PERFECT WAVES S6280 Mode D'emploi page 5

ENGLISH
F INSTRUCTIONS FOR USE
1 Before use, ensure the hair is clean, dry and tangle-free.
2 For extra protection use a heat protection spray.
* Hair sprays contain flammable material – do not use while using the styler.
3 Section the hair prior to styling. Style the lower layers first.
4 Plug in the styler and slide switch to turn on.
5 Start styling on lower temperatures first. Select appropriate temperature for you hair
type using the controls on the side of the styler.
Temperature Wheel settings:
0 = Off
150 = Lowest temperature
210 = Maximum temperature
6 The on-indicator will flash whilst the styler is heating up and glow when styler is ready to
use – this will be about 30 seconds.
7 Take a section of hair. Starting at the roots place the waving plates either side of the
section of hair press them shut and hold for a few seconds.
8 Repeat down the section of hair until a wave is created in the full length.
9 Let the hair to cool before styling.
10 Repeat this around the head in sections.
11 To create tighter waves take smaller sections of hair and press the plates together for
longer.
12 To create looser waves take larger sections of hair, press for less time and brush hair out
once cooled.
13 When finished slide the switch to turn off and unplug the appliance.
C CLEANING AND MAINTENANCE
Unplug the appliance and let it cool.
Wipe all surfaces with a damp cloth.
Don't use harsh or abrasive cleaning agents or solvents.
4