Before You Call For Service - Bertazzoni MD24X Mode D'emploi

Please check the following before calling for service. It may save you time and expense.
PROBLEM
1. Part or all of
Drawer Microwave
does not
operate.
2. Food in Drawer
Microwave is not
heated.
3. Drawer Microwave
light does not work.
4. Touch controls will
not operate.
5. Display flashes.
6. Steam from the vent. • During microwaving, steam may come from
E

BEFORE YOU CALL FOR SERVICE

POSSIBLE CAUSE
• Power cord of Drawer Microwave is not
completely connected to the electrical outlet.
• Power outage.
• Fuse/circuit breaker at home doesn't work.
• Drawer Microwave is in Demo Mode.
• No power to the appliance.
• Drawer Microwave controls improperly set.
• Drawer Microwave is in Demo Mode.
• Light bulb is loose or burned out.
• Control Lock is on.
• Power failure.
the right side of the vent.
• Make sure the power cord is tightly
connected to the outlet.
• Check house lights to be sure. Call your local
electric company for service.
• Replace the fuse or reset the circuit breaker.
• See page 18 for how to cancel Demo Mode.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly set.
• See page 18.
• Call for service.
• See page 17 to unlock.
• Touch Clear pad and reset the clock. If the
Drawer Microwave was in use, you must
reset the cooking function.
20
SOLUTION