Pairing The Receiver (Handset) With Mobile Telephone - Dog trace X30 Mode D'emploi

9
The main benefits of the DOG GPS X30 include the ability of wirelessly connect the
receiver to a mobile phone (tablet) that works on the Android operating system.
All devices paired on the receiver may be viewed in on-line or off-line map on your
mobile phone.
Download and install the Dogtrace GPS application from Google Play.

9.1 Pairing the receiver (handset) with mobile telephone

NOTE: Prior the pairing process, prepare your PIN code, which you can find on the
backside of the instruction manual (or inside the product packaging).
Prior to pairing, check whether the
this symbol does not show, the wireless communication must be turned on in the
receiver.
1. Long press the MENU push button.
2. Select the
MENU push button again.
3. Select
and by repeated pressing of
4. Symbol
will start flashing on the receiver display.
5. Press red in the Dogtrace GPS application or select (Menu) and X30 receiver
connection.
6. Continue by following the instructions that appear in the application.
7. The application will prompts you to enter the pin code found on the back of
the Operating Manual (Certificate of Warranty).
8. While proceeding first device pairing, a request for PIN code is displayed. For some
mobile phones, the PIN entry window must be opened from the notification bar
(notification bar).
9. Following correct pairing the
receiver display and the Connected message appears in the application.
10. In the application, press the back arrow to return to the map. All devices paired
with the receiver and waypoints stored in the receiver are now displayed on the
map.
NOTE: If pairing of the X30 receiver with mobile phone isn't successful, try to turn
on/off the receiver and turn on/off the Dogtrace GPS application. Pair the receiver
with mobile telephone.
Each application feature is described in the manual, which may be downloaded from
www.dogtrace.com.
GPS X30 APPLICATION
symbol flashes on the receiver display. If
by
symbol should be continuously lit on the
/ arrows and long press the
return to the main screen.
23