Acksys EmbedAir100 Guide D'utilisation page 15

Mechanical characteristics
Dimensions (w/o antennas)
Weight (±1%) (w/o antennas & w/o
EmbedAir)
Enclosure
Operating temperatures ranges
Storage temperatures ranges
Status indicators
Reset button
Power supply Input
Specifications
Connector
External source
Ethernet interface
Type
Connectors
Cable
Serial interface (only under ACKSYS agreement)
Type
Connectors
Specifications for the EmbedAir are detailed in the "EmbedAir Hardware
Manual" documentation, available on the ACKSYS web site.
SPECIFICATIONS
L x l x h = 128 x 133 x 58 mm
L x l x h = 5 x 5.23 x 2.28 in
130 g (4.6 oz)
None
-40°C to +77°C (-40°F to 167°F)
-40°C to +85°C (-40°F to 185°F)
12 LEDs: see LEDs definition section
Short push, anytime:
Long push (> 2 sec.):
- while operating:
- while in emergency upgrade mode:
- at startup:
- DC 12V +/- 5% with fuse (ref: 0154001.DR) and
polarity protection,
- DC 5V +/- 5% w/o fuse and protection
- Jack Ø2.1mm
- Molex 15-24-4441 (type 8981-4M)
110/230VAC to 12VDC power supply, 12W, Jack
plug with a 1.5m cable.
Auto MDI / MDIX with automatic negotiation
(HDX/FDX) 10 Base T / 100 Base Tx / 1000
Base T or 10 Base T / 100 Base Tx
RJ45 female
1 meter Ethernet cat.5e cable included
2 serial ports RS-232 type (TX/RX only)
SUB-D 9 pins male
-7-
à Reset
à Restore factory settings
à Restore factory settings
à enter emergency upgrade