Fcc Et Canada - Siemens IFP1500 Instructions De Service

Le tableau suivant indique le numéro de contrôle de la classe de pupitre opérateur :
Site de fabrication
Siemens AG
Industry Sector
Werner-von-Siemens-Straße 50
D-92209 Amberg

FCC et Canada

USA
Federal Commu-
nications Com-
mission
Radio Frequency
Interference
Statement
Shielded Cables
Modifications
Conditions of
Operations
CANADA
Canadian Notice
Avis Canadien
AUSTRALIE/NOUVELLE-ZELANDE
Ce produit satisfait aux exigences de la norme EN 61000-6-4:2007 normes génériques -
Norme sur l'émission pour les environnements industriels.
This product meets the requirements of the standard EN 61000-6-4:2007 Generic standards
– Emission standard for industrial environments.
COREE
Ce produit satisfait aux exigences de la certification coréenne.
This product satisfies the requirement of the Korean Certification (KC Mark).
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Instructions de service, 11/2014, A5E31298384-AC
Classe du pupitre
Comfort Panel, ITC, IFP
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference at his
own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003 (B).
Cet appareil numérique de la classe A est conforme à la norme NMB-003 (B) du
Canada.
Caractéristiques techniques
7.1 Certificats et homologations
Numéro de contrôle
DEKRA11ATEX0005X
IECEx DEK 13.0085X
61