Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Once the chain tension is correct, tighten the chain locking
u
nut (8).
Warning! When the saw chain is new, check the tension
frequently during the first two hours of use as a new saw chain
stretches slightly.
Oiling the chain
This pole pruner is equipped with an auto oiling system that
keeps the saw chain and guide bar constantly lubricated. The
saw chain must be oiled using only the correct grade of oil
(cat. no. A6027).
Oil the whole saw chain (10) evenly
u
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Z
Separate collection. This product must not be disposed
of with normal household waste.
Should you find one day that your BLACK+DECKER product needs
replacement, or if it is of no further use to you, do not dispose of it
with household waste. Make this product available for separate
collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER office at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
10
(Original instructions)
Technical data
Voltage
No-load chain speed
Max. Cutting Length
Weight
Level of sound pressure according to EN ISO 11680-1, EN ISO 3744:
Sound pressure (L
) 78 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 98 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Cutting freshly felled softwood (a
) = < 2.5 m/s
h, W
EC declaration of conformity
MACHINERY DIRECTIVE
%
PS7525
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC and EN 60745-1
These products also comply with Directive
2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
PS7525 (Type 1)
230
V
AC
114
minˉ¹
17
cm
3.5
Kg
2
2
, uncertainty (K) 1.5 m/s
R.Laverick
Engineering Manager
Berkshire, SL1 3YD
United Kingdom
13/10/2014
Publicité
Table des Matières
