Replacing The Cartridge Of The Smartclean System - Philips S95 Série Mode D'emploi

ENGLISH
26
, The on/off button and the rinsing symbol both
light up continuously.
Note: The rinsing phase takes approx. 10 minutes.
, During the drying phase, the drying symbol
lights up continuously.
Note: The drying phase takes approx. 4 hours.
, When the cleaning program has been completed,
the ready symbol lights up continuously.
, The battery symbol lights up continuously to
indicate that the shaver is fully charged.
Note: Charging takes approx. 1 hour.
Note: If you press the on/off button of the
SmartClean system during the cleaning program,
the program aborts. In this case, the rinsing or
drying symbol stops flashing.
Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts.
Note: 30 minutes after the cleaning program and
charging have been completed, the SmartClean
switches off automatically.
Replacing the cartridge of the SmartClean
System
- Replace the cleaning cartridge when the
replacement symbol flashes orange or when
you are no longer satisfied with the result.