Exhaust Blower - England's Stove Works 25-CBEP Manuel D'installation Et D'opération

Exhaust Blower Cleaning
Although the exhaust blower and blower housing were designed to minimize ash
build-up, some fly-ash will still accumulate there throughout the burning season.
The amount and type of ash will depend on the type of pellets and venting system,
but generally this accumulation will be mild. If, when cleaning the exhaust
blower, a large accumulation of fly-ash is found, cleaning the exhaust blower and
housing should be performed monthly or bimonthly to prevent this excess buildup.
Instructions
 Before beginning the exhaust blower cleaning procedure, be certain the
unit is unplugged and thoroughly cooled down.
 To remove the side panel and access the exhaust blower:
o Remove the two 5/16" screws on the rear of the unit that hold the side panel
on, on the side nearest the exhaust blower (the left side when facing the
front of the stove).
o Pull the side panel straight back, supporting it carefully, and pull it away
from the stove; the side panel should slip off of the key slot supports.
o Once the side panel is removed, the exhaust blower will be clearly visible.
 Disconnect the venting system from the exhaust blower just enough that you
will be able to remove the exhaust blower from the stove.
 Unplug the two wires which connect the stove wiring harness to the exhaust
blower using the quick connect plugs.
 Loosen and remove the 5/16" screw, on the top of the exhaust blower output
connection, which holds the thermal sensor to the exhaust blower.
 Loosen the five (5) 5/16" self-drilling screws which hold the exhaust blower
to the exhaust blower tube. The lower screws are most easily accessed
through the circular cutouts in the stove body. A 12" socket extension will
likely be necessary to reach all of the screws.
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING
CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR
DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.
YEARLY MAINTENANCE
33