Troubleshooting - rialto ZED-TTR2-RI Manuel D'installation

Troubleshooting

1) The temperature measurement appears/disappears continuously on the
display of the R
ialto
/
Replace the internal batteries, which may have run low
2) During the R
ialto
error message.
/
The thermostat was not unpaired correctly (noNet) before starting
the procedure. Proceed with the t
pairing the device again
3) The ambient temperature appears on the R
Thermostat display shows the
/ No radio connection with the W
the Thermostat, add R
check that the W
S t
maRt heRmoStat
S t
maRt heRmoStat
icon (Wi-Fi strikethrough):
hite
devices providing repeater functionality, or
ialto
b
is powered up.
hite ox
| 23 |
.
pairing procedure, the App gives an
Reset procedure and try
heRmoStat
S
ialto maRt
b
. Position the control unit nearer
ox
t
but the
heRmoStat
EN