rialto ZED-TTR2-RI Manuel D'installation page 20

Connection of R
7. Open the R
head screwdriver (fig. 2)
8. Remove the protective cover from the terminals (fig. 3)
9. Connect the wires to the terminals, maintaining positions COM (Com-
mon), NO (Normally Open) and the optional NC (Normally Closed) if wired
into the system (fig. 4). Offer the back plate to the wall and fix in place.
10. Cover the terminals with the shield provided.
11. Insert the batteries and mount the R
(figures 5 and 6).
EN
12. Reconnect to the electrical power supply.
fig. 3
S
ialto maRt
S t
ialto maRt heRmoStat
NO COM NC
t
heRmoStat
by pressing on point A with a slotted
S
ialto maRt
fig. 4
| 20 |
t
to the wall
heRmoStat