Unpacking; Disposal Of The Packaging; Setup; Setup Location Requirements - Caso Germany TG 300 Mode D'emploi

12.3 Unpacking

12.4 Disposal of the packaging

12.5 Setup

12.5.1 Setup location requirements:

caso Tischgrill 300
Please note
► Examine the shipment for its completeness and for any
visible damages.
► Immediately notify the carrier, the insurance and the supplier
about any incomplete shipment or damages as a result of
inadequate packaging or due to transportation.
To unpack the device, remove the device out of the carton and
remove the packaging material.
The packaging protects the device against damages during
transit. The packaging materials are selected in accordance
with environmentally compatible and recycling-related points of
view and can therefore be recycled.
Returning the packaging back to the material loop saves raw
materials and reduces the quantities of accumulated waste.
Take any packaging materials that are no longer required to
"Green Dot" recycling collection points for disposal.
Please note
► If possible, keep the original packaging for the device for the
duration of the guarantee period of the device, in order that the
device can be re-packaged properly in the event of a guarantee
claim.
In order to ensure the safe and trouble-free operation of the
device, the setup location must fulfil the following prerequisites:
• The appliance must be positioned on a solid, even, horizontal
and heat-resistant base with sufficient load-supporting capacity
for the appliance itself plus the heaviest anticipated cooking
contents.
• Select an installation location where children cannot reach the
appliance's hot surface.
• The appliance is not intended as a built-in appliance.
Commissioning
33