Dirna bycool green line 950 Manuel De L'utilisateur page 9

950
Function
F0 T
he user can choose the comfort temperature and change the speed of the unit
blower.
The comfort temperature is controlled by briefly pressing the
(15/ 27 ºC - 59/80º F)
Blower speeds are controlled by holding down the
remote control, the following symbols will appear on the display: V1, V2, V3, V4, V5
Function F1 - Digital thermometer function
In this function, the Minicool 950 will indicate on the screen the temperature inside the cabin.
Function F2 - Time Programming Function
F2 programmes the unit to disconnect automatically during a period of time between 1
and 9 hours. To programme it, keep the On/ Off key
screen, select the operating time with the
.
Function F4 Automatic Operation of the Unit
When selecting F4 , the symbol CA will appear on the display alternating between the
selected temperatures Between (15/ 27 ºC - 59/80º F).
With this function, the unit regulates automatically its performance parameters.
To activate this function, keep the ON/OFF
F6, and then release the key to directly enable ºF. To return to ºC, keep the
control panel pressed down with the display flashing C
press the key on the control panel. The control is disabled when carrying out this
operation, meaning it must be registered again once finished.
F0 Manual Operation of the equipment
or
in remote control.
F6 Function: ºF Selection
keys of control panel,
pressed until F2 appears on the
keys and confirm by pressing On/ Off
key pressed down until the display shows
9
dirna
, s.a.
keys of control panel
or
key on the
, when it stops flashing,
EN
in
.