First Use And Charging; Using The Shaver - Braun CoolTec 5676 CT6cc Mode D'emploi

Our products are designed to meet the highest
standards of quality, functionality and design.
Thank you for your trust in Braun's quality, and we
hope you enjoy your new Braun shaver.
This shaver cools the skin to give you a cooling
sensation for a pleasant shave.
Please read the use instructions carefully and
completely before using the appliance.
Important
We recommend not to use the shaver with any foam
or gel to ensure that you
– experience the optimal cooling effect.
– get the optimal cleaning performance from the
Clean&Charge station (for CC models).
– avoid potential damage to the device.
Shaver description
1 Foil & Cutter cassette
2 Cooling element
3 Cooling on/off switch
4 Shaver display
5 On/off switch
6 Long hair trimmer
7 Shaver-to-shell/station contacts
8 Release button for long hair trimmer
9 Model number
10 Special cord set
11a Brush
11b Pouch
11c Protective cap
12a Charging shell
12b Shell power socket
12c Stand for charging shell
12d Shell-to-shaver contacts

First use and Charging

Prior to first use, connect the shaver to an electrical
outlet using the charging shell as described below,
or for models CT6cc/CT5cc/CT4cc/CT3cc/CT2cc
use the Clean&Charge station (see Chapter
«Automatic Clean&Charge station description»).
Note: The shaver can only be charged via the
charging shell or the Clean&Charge station.
Models CT4s/CT2s must not be used with the
Clean&Charge station.
Charging shell (see fig. B)
• Click the charging shell (12a) onto the stand (12c
- models CT4s/CT2s only). Using the special cord
set (10), connect the shell power socket (12b) to
an electrical outlet.
• Place the shaver into the charging shell. The
contacts (7) on the back of the shaver need to
align with the contacts (12d) in the charging shell.
A beep sound confirms that the shaver sits
properly in the station.
• The shaver will be automatically charged.
8
Charging and basic operating information
• A full charge provides up to 45 minutes of shaving
time (up to 15 minutes with activated cooling
function). This may vary according to your beard
growth and environmental temperature.
• Recommended ambient temperature for charging
is 5 °C to 35 °C. The battery may not charge properly
or at all under extreme low or high temperatures.
Recommended ambient temperature for shaving
is 15 °C to 35 °C.
• Do not expose the appliance to temperatures
higher than 50 °C for extended periods of time.
• When the shaver is connected to an electrical
outlet, it may take some minutes until the display
illuminates.
Shaver display
Charge status
During charging the symbol in the on/off switch (5)
blinks green. When fully charged, it will light up for a
few seconds, provided the shaver is connected to an
electrical outlet.
Low charge
The symbol in the on/off switch (5) shines red when
the battery is running low. You should be able to
finish your shave. When switching off the shaver a
beep sound reminds you of the low charge status.
Cleaning Status (only models CT6cc/CT5cc/
CT4cc/CT3cc/CT2cc)
The cleaning indicator
needs to be cleaned in the Clean&Charge station.
Travel lock
The lock symbol lights up when the shaver has
been locked to avoid unintended starting of the
motor (e.g. for storing it in a suitcase).

Using the shaver

Press the on/off switch (5) to operate the shaver.
Tips for a perfect dry shave
For best results, Braun recommends you to follow
3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at right angles
(90°) to your skin.
3. Stretch your skin and shave against the
direction of your beard growth.
Cooling
Note: The cooling sensation experienced may differ
from person to person. It is influenced by personal
and environmental factors (e.g. skin, environmental
temperature).
lights up, when the shaver
(see fig. A)