Extraordinary Maintenance - Comet CSW 650 Manuel D'utilisation Et D'entretien

EXTRAORDINARY MAINTENANCE

REPLACEMENT OF BRUSHES
Central Brush:
•
Remove completely the front basin for wastes;
•
Unscrew the two clamping screws
•
Extract the central brush
•
Assembly the new brush following the above-mentioned stages backwards.
Lateral Brush:
Lift the brush support arm to а vertical position.
•
•
Unscrew fastening screws
•
Reassembly the new brush following the above-mentioned stages backwards.
N.B.: After installing new brushes, check their height.
adjust them.
1
(2)
as shown in Figure;
2
(1)
and remove the worn brush.
(1);
26
If
necessary,