Installation - Comet CSW 650 Manuel D'utilisation Et D'entretien

1

INSTALLATION

After unpacking the sweeper,
1
install the handle in operating
position and the brush on the
relative support arm
according to the following
procedure:
• Unscrew locking wheels (1).
• Lift the handle to the operating
position (1).
• Reposition
Make sure to tighten them
hard in the proper place on
the handle.
2
• Take the brush out of the dirt container.
• Lift the support arm to а vertical position.
• Position the brush against the
rotary
brush holes and support holes
are matching.
• Firmly secure the brush to its
support with the screws supplied
with the product (1).
21
wheels
support. Make sure that
(2).