Philips SatinPerfect HP6578 Mode D'emploi page 17

Problem Cause
The overload
protection is activated
because something
got caught between
the rotating discs or
because you pressed
the appliance too
hard onto your skin.
The precision The batteries are
epilator does not empty or have been
work. inserted incorrectly.
Solution
When the overload protection has been activated,
the speed setting indications lash red. Turn the discs
with your thumb until you can easily remove the
item that is blocking the rotating discs. Then switch
on the appliance again. Do not press the appliance
too hard onto your skin.
Replace the batteries or insert them correctly (see
'Inserting the batteries' in chapter 'Using the precision
epilator').
EnglisH
17