ALPATEC CT 3000 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

notice_CT3000
22/11/06
17:39
Page 8
USERS CAUTIONS
USERS CAUTIONS
1. You can use this appliance either inside or outside. It will be usefull in your patio when the
temperatures are cooling down. It has been done to resist in wet atmosphere.
2. Do not leave flammable items, such as paper, clothes, etc., close to the device.
3. Do not touch the cover or protective grill of the heating unit when the device is on.
The temperature is high and you may burn yourself!
4. When the device is turned on, it will take some time to start heating.
ASSEMBL
Y
ASSEMBL
Y
CAUTION: For safety reasons, carefully assemble the device as set out below and make sure
the heating element, tubes and base are tightly fitted, then bolted to each other.
1: Remove the soft foam from the heating elements
Remove the protective net from the head of the heater (remove the screw). Remove the soft foam gen-
tly as per the direction of the arrowhead. Be careful not to damage the heating tubes. Put the protec-
tive net back and tighten the screws.
Note: this operation MUST be done before plugging the appliance.
Take out the screws
Soft foam
8

Publicité

Table des Matières
loading

Table des Matières