Philips SC1992 Mode D'emploi page 22

Masquer les pouces Voir aussi pour SC1992:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 69
ENGLISH
22
Problem
All intensity lights
go on alternately.
All intensity
lights are blinking
simultaneously.
The appliance
produces a strange
smell.
The skin feels
more sensitive
than usual during
treatment.
I experience an
unacceptable pain
sensation when I
use the appliance.
Possible cause
Solution
The appliance
To reset the appliance, switch off the appliance and switch it
needs to be reset.
on again. If the intensity lights continue to go on alternately,
contact the Consumer Care Centre in your country, your
Philips dealer or a Philips service centre.
The appliance is
Contact the Consumer Care Centre in your country, your
defective.
Philips dealer or a Philips service centre.
The body
Clean the body attachment and the light exit window
attachment and/or
carefully. If you are unable to clean the body attachment
the filter glass is
properly, contact the Consumer Care Centre in your country,
dirty.
your Philips dealer or a Philips service centre to replace the
body attachment.
You have not
If there are hairs on the area to be treated, these hairs may
shaved the area
get burnt when you use the appliance. As a result, you notice
to be treated
a strange smell. Shave the area to be treated properly before
properly.
you use the appliance. If shaving causes skin irritation, trim
hairs as short as possible and use the Lumea Essential at a
comfortable setting.
You stored the
Clean the appliance and the body attachment (see chapter
appliance in a
'Cleaning and maintenance').
dusty environment.
The light intensity
Check the skin/hair colour table before each use, to ensure
you have chosen
you select the right light intensity for each treatment. If
is too high.
necessary, select a lower light intensity.
You did not shave
Shave the areas to be treated before you use the appliance.
the areas to be
If shaving causes skin irritation, trim hairs as short as possible
treated.
and use the Lumea Essential at a comfortable setting.
The light exit
If the light exit window is broken, do not use the appliance
window is broken.
anymore, to avoid the risk of skin reactions. Contact the
Consumer Care Centre in your country, your Philips dealer
or a Philips service centre.
You did not shave
Shave the areas to be treated before you use the appliance.
the areas to
If shaving causes skin irritation, trim hairs as short as possible
be treated
and use the Lumea Essential at a comfortable setting.
You treated an
You must not use the appliance on your face, inner labia,
area for which the
vagina, anus, nipples and areolas. Men must not use it on
appliance is not
their face or scrotum.
intended.
You have used a
Reduce the light intensity to a level that is comfortable for
light intensity that
you. See chapter 'Preparing for use', section 'Light intensity'.
is too high for you.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sc1991

Table des Matières