Cautions On Use - Pioneer XW-BTSP-W Mode D'emploi

Cautions on use

When moving this unit
When moving this unit, be sure to first check
that there is disconnect the AUDIO IN cable.
Then slide STANDBY/ON switch, and then
unplug the power cord. Damage may occur
when another device is connected to AUDIO IN
Place of installation
monitor. Also, place it away from cassette
decks and other devices easily affected by
magnetic forces.
Avoid the following locations:
cigarette smoke
(kitchens, etc.)
Do not place objects on this unit
Do not obstruct the ventilation holes.
Do not use this unit on shaggy rugs, beds, sofas,
etc., or wrapped in cloth, etc. Doing so will
prevent the heat from dispersing, leading to
damage.
Do not expose to heat.
Do not place this unit on top of an amplifier or
other components that generate heat. When
rack mounting it, to avoid the heat given off by
the amplifier or other audio components, place
it on a shelf below the amplifier.
using it.
patterns may appear on a TV screen and
noise may enter the sound of radio
broadcasts when the power of this unit is
on. If this happens, turn off the power of
this unit.
Cleaning the this unit
outlet when cleaning this unit.
dirt, apply some neutral detergent diluted
in 5 to 6 parts water to a soft cloth, wring
out thoroughly, wipe off the dirt, and then
wipe again with a soft, dry cloth.
could cause the print or paint to peel off.
Also, leaving rubber or vinyl products in
contact with this unit for long periods of
time could mar the cabinet.
etc., read the cautions included with the
wipes carefully.
possible modifications without notice, due to
improvements.
8