Comfort Mode; Automatic Mode; Operating Modes, Program Mode P / User Programs U1 And U2 - LK Armatur SmartComfort RT Manuel D'instructions

GB OPERATING MODES
The unit has three operating modes: Auto, Comfort and Holiday/
Timer mode. Open the cover to have access to the navigation keys
. Select the desired operation mode and press OK.
and

Comfort mode

Operating mode with fixed temperature around the clock. To adjust
the comfort temperatur use the (+)or (-)keys. The factory setting
is 21 ° C. Note that the hand symbol is not shown during operation.

Automatic mode

In this mode the room temperature unit will follow a chosen built-
in (P1-P9) or customized program (U1 or U2). To set/change a
chosen program, see Program mode
GB PROGRAM MODE
Program Mode
Open the cover. Use the navigation buttons
P
select program mode . Press OK to confirm. With the (+) or
(-) buttons a preset program P1 to P9 or a self-composed user
program U1 or U2 can be selected. Comfort temperature periods
are shown in the program graph at the bottom of the display. A
blinking segment shows the current time.
= Away Mode - Reduced temperature.
Factory setting: 17°C
= Sleep Mode - Reduced temperature.
Factory setting: 19°C
Built-in programs P1 to P9
Program Comfort / Reduced temperature
P1 At work all day Comfort (day 1-5) 06:00 - 09:00,
16:00 - 23:00,
(day 6-7) 08:00 - 23:00
P2 At work all Comfort (day 1-5) 06:00 – 09:00,
day, lunch at 11:00 – 13:00,
home 16:00 – 23:00, (day 6-7) 08:00 – 23:00
P3 At home Comfort (day 1-5) 06:00 – 23:00,
(day 6-7) 08:00 - 23:00
P4 Day shift Comfort 04:00 – 06:00, 13:00 – 21:00
P5 Afternoon shift Comfort 07:00 – 14:00, 21:00 – 24:00
P6 Night shift Comfort 05:00 – 08:00, 15:00 – 22:00
P7 Offi ce Comfort (day 1-5) 07:00 – 18:00
P8 Shop Comfort (day 1-6) 08:00 – 19:00
P9 Cottage Comfort (day 1) 06:00 – 09:00,
(day 5) 15:00 – 24:00, (day 6-7) 06:00 – 23:00
The factory temperature settings for away and sleep modes can be changed in the
Service menu.
Creating user programs U1 and U2
With U1 and U2 you can create your own program. The time step
is 30 minutes. Each time a value or symbol blinks, you can make
a choice with the (+) or (-) keys. Once the choice is made press
OK to go to the next step. You can at any time cancel a setting by
pressing .
8
P
.
P /
USER PROGRAMS
or
You can temporarily override a scheduled temperature change.
This is done by by changing the set temperature value with the (+)
or (-) keys. The newly selected value will blink for some seconds.
The symbol is blinking to show that the current program step
has been overridden. At the next program step the controller will
return to the chosen program. Note that a change of temperature
during a comfort temperature period will be permanent.
Holiday / Timer mode
The holiday/timer mode allows you to set a desired room tem-
perature for from 1 hour to 255 days. Select program mode
The temperature blinks. Set the temperature and press OK. 01d
blinks. Set the duration with the (+) and (-) keys and press OK. The
symbol will blink during the entire period. The display shows
the time left until the end of the period.
When the holiday/timer period has expired the room unit will
return to the previous operating mode.
U1 U2
AND
Select program mode P. Then select user program U1 with the (+)
or (-) keys. Press the edition key
to
programming starts 00:00 and ends 24:00.
blinks and the display shows 01. Select desired mode
with (+) or (-). Press OK. In this example select
or
The time 00:00 blinks and the display shows 01A. With (+) or (-)
you set the time when the reduced temperature should start this
day e.g. 00:00. Press OK.
The time 00:30 will blink and the display shows 01b. With the (+)
or (-) keys you set the time when the reduced temperature should
finish, 06:00. Press OK. The temperature blinks. Set the desired
reduced temperature, 20°C. Press OK.
blinks and the display shows 02. Select the desired mode and
press OK. In this example select
the display shows 02A. With the (+) or (-) key you select the time
when the reduced temperature should start, 09:00. Press OK.
The time 09:30 will blink and the display shows 02b. With the (+) or
(-) keys you select the time when the reduced temperature should
finish, 16:00. Press OK.
The temperature blinks. Select the desired reduced temperature
18°C and press OK.
In this way further settings can be made. Max. settings a day are 5
periods.
When you are finished programming press the edition key
the display will show Copy Yes.
Now you can choose to copy the day program just created to
subsequent days. The program creation will always start with day
1=First day of the week. Press OK and copy the program to the
following day.
If you don't want to copy the program, change the choice Copy Yes
to Copy no with the (+) or (-) keys and confirm your choice with
the OK key. You will now be invited to create a new program for the
following day.
When you press OK on the last day 7, you will be invited to save
your program. The message SAVE appears and the green LED
blinks. Press OK to save your program. Auto operating mode and
user program U1 are now shown on the display.
The program you now have created has comfort temperature from
06:00 – 09:00 and 16:00 – 24:00.
Reduced temperature
Reduced temperature
to create a new program. The
.The time 06:00 blinks and
, 20°C, 00:00 – 06:00
, 18°C, 09:00 – 16:00
.
.
and