Feed Timer; Room Temperature - Philips AVENT SCD720 Mode D'emploi

Feed timer

Room temperature

You can set the feed timer to alert you that it is time to feed your baby. The
timer can be set from 1 minute to 23 hours and 59 minutes.
1 To open the feed timer submenu, select 'Feed Timer' in the menu. Press
OK to confirm.
2 Select 'Set Timer' in the feed timer submenu. Press OK to start setting the
timer.
3 Set the hour and the minutes and press OK to confirm.
4 To start the feed timer, select 'xx:xx Start' in the feed timer submenu.
Press OK to confirm. The timer symbol appears on the display and the
timer starts counting down.
5 When the timer has reached 00:00, the feed timer alert goes off, the
timer symbol starts flashing on the display and the message 'TIMER END'
scrolls across the display.
6 To stop the timer, select 'Stop & Reset' in the feed timer submenu and
press OK to confirm.
Setting the feed timer repeat
1 To make the feed timer go off after the same set time, select 'Timer
repeat' in the feed timer submenu after you have set the timer. Press OK
to confirm.
2 Choose 'Repeat ON' or 'Repeat OFF' and press OK to confirm. The timer
repeat symbol appears on the display.
3 If 'Repeat ON' is set, the feed timer starts counting down again after you
stop the alert.
Setting a feed timer alert
1 To set an alert, select 'Timer Alert' in the feed timer submenu. Press OK to
confirm.
2 Choose one of the alert options. The options available are sound only,
sound and vibration and vibration only.
3 Press any key to stop the alert or the alert stops automatically after 2
minutes.
4 To stop the timer, select 'Stop & Reset' in the feed timer submenu and
press OK to confirm.
A baby sleeps comfortably at a temperature between 16°C/61°F and
20°C/68°F. You can set a minimum and a maximum temperature range and
an alert.
1 To open the temperature submenu, select 'Temperature' in the menu.
Press OK to confirm.
English
15