BH HIPOWER Duke H920E Instructions De Montage Et Utilisation page 9

MAINTENANCE EVERY 200 HOURS.-
1. CHECKING & ADJUSTING THE BELT.
- Check that the belt is tensioned properly. If the
belt skids it will be necessary to tighten the belt.
- Remove the side covers (49) and loosen the nuts
a maximum of two turns.
-Tighten the small nuts with a spanner. Make sure
that the nut rotates the same number of turns on
both sides of the machine (generally 2 turns will be
sufficient) otherwise the drive sprocket might
become skewed, creating a lot more noise and
making it possible for the belt to fall off.
-Tighten up nuts again and put the side covers (49)
back in their place.
-Whenever the tension setting on the machine is
adjusted, readjust the brakes as well.
BH RESERVES THE RIGHT TO MODIFY THE
SPECIFICATIONS OF ITS PRODUCTS WITHOUT
PRIOR NOTICE.
Do not hesitate to get touch with us if you have any
queries, by calling:
+34 902 170 258
service@bhfitness.es
9