Yamana DS2416 Mode D'emploi page 152

154
Effects Parameters
DUAL PITCH
Parameter
PITCH 1
FINE 1
PAN 1
DELAY 1
FB.G 1
LEVEL 1
PITCH 2
FINE 2
PAN 2
DELAY 2
FB.G 2
LEVEL 2
MODE
ROTARY
Parameter
ROTATE
SPEED
DRIVE
ACCEL
LOW
HIGH
SLOW
FAST
RING MOD. (ring modulator)
Parameter
SOURCE
OSC FREQ
FM FREQ
FM DEPTH
DS2416
Range
–24 to +24 semitones Pitch 1 pitch shift
–50 to +50 cents
L16–C–R16
0.0–1000.0 ms
–99 to +99%
–100 to +100%
–24 to +24 semitones Pitch 2 pitch shift
–50 to +50 cents
L16–C–R16
0.0–1000.0 ms
–99 to +99%
–100 to +100%
1–10
Range
STOP, START
SLOW, FAST
0–100
0–10
0–100
0–100
0.05–10.00 Hz
0.05–10.00 Hz
Range
OSC, SELF
0.0–5000.0 Hz
0.05–40.00 Hz
0–100%
Description
Pitch 1 pitch shift fine
Pitch 1 pan position
Pitch 1 delay time
Pitch 1 feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
Pitch 1 level (plus values for normal phase, minus
values for reverse phase)
Pitch 2 pitch shift fine
Pitch 2 pan position
Pitch 2 delay time
Pitch 2 feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
Pitch 2 level (plus values for normal phase, minus
values for reverse phase)
Pitch shift precision
Description
Rotation stop, start
Rotation speed (see SLOW and FAST parameters)
Overdrive level
Acceleration at speed changes
Low-frequency filter
High-frequency filter
SLOW rotation speed
FAST rotation speed
Description
Modulation source: oscillator or input signal
Oscillator frequency
Oscillator frequency modulation speed
Oscillator frequency modulation depth