Yamana DS2416 Mode D'emploi page 150

152
Effects Parameters
ECHO
Parameter
DELAY L
FB.D L
FB.G L
DELAY R
FB.D R
FB.G R
L->R FB.G
R->L FB.G
HI.RATIO
HPF
LPF
CHORUS
Parameter
FREQ.
PM DEPTH 0–100%
AM DEPTH 0–100%
MOD.DLY
WAVE
FLANGE
Parameter
FREQ.
DEPTH
FB.GAIN
MOD.DLY
WAVE
DS2416
Range
0.0–1350.0 ms
0.0–1350.0 ms
–99 to +99%
0.0–1350.0 ms
0.0–1350.0 ms
–99 to +99%
–99 to +99%
–99 to +99%
0.1–1.0
Thru, 21 Hz–8.0 kHz
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
Range
0.05–40.00 Hz
0.0–500.0 ms
Sine, Tri
Range
0.05–40.00 Hz
0–100%
–99 to +99%
0.0–500.0 ms
Sine, Tri
Description
Left channel delay time
Left channel feedback delay time
Left channel feedback gain (plus values for nor-
mal-phase feedback, minus values for
reverse-phase feedback)
Right channel delay time
Right channel feedback delay time
Right channel feedback gain (plus values for nor-
mal-phase feedback, minus values for
reverse-phase feedback)
Left to right channel feedback gain (plus values for
normal-phase feedback, minus values for
reverse-phase feedback)
Right to left channel feedback gain (plus values for
normal-phase feedback, minus values for
reverse-phase feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Description
Modulation speed
Pitch modulation depth
Amplitude modulation depth
Modulation delay time
Modulation waveform (Sine: sine wave, Tri: trian-
gular wave)
Description
Modulation speed
Modulation depth
Feedback gain (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
Modulation delay time
Modulation waveform (Sine: sine wave, Tri: trian-
gular wave)