Table des Matières
Publicité
Appendix
Specifications
Product specifications
Dimensions (W x H x D)
Weight
Power supply voltage
Power consumption
Heat dissipation (per hour)
Operating temperature range
Storage temperature range
NC value
Maximum number of simulta-
neously usable devices
Power cord length
Included items
Electrical specifications
Sampling frequency
Signal delay
Frequency response
Total harmonic distortion
Dynamic range
Equivalent input noise (EIN)
Crosstalk / Channel separation -100dB (@1kHz)
Maximum cable length
Indicators
Phantom power (EXi8)
Connector specifications
Format
Cable specifications
90
EXi8/EXo8 Owner's Manual
480(W) x 44(H) x 351(D)mm, 1U
4.3 kg
Japan: 100V 50/60Hz
US/Canada: 110V–240V 50/60Hz
Others: 100V–240V 50/60Hz
25 W max.
21.5 kcal max.
0 °C–40 °C
-20 °C–60 °C
24 (1m from the front panel)
A total of seven EXi8 and EXo8 devices. (However in a system, a total of up to 20 devices, including
devices such as the MTX series and XMV series, can be used.)
2.5m
Power cord, Euroblock plugs (3-pin, tabbed) x 8, cable ties x 8, Owner's manual
48kHz/44.1kHz
Less than 2.5ms
20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max.
Less than 0.05% (+4dBu, Gain:-6dB); less than 0.1% (+4dBu, Gain:+66dB)
107dB (Gain:-6dB)
-126dBu (Gain: +66dB)
[YDIF] connector: 30 meters (Cable length between devices)
INPUT PEAK (EXi8): RED -3dBFS
INPUT SIGNAL (EXi8): GREEN -40dBFS
OUTPUT SIGNAL (EXo8): GREEN -40dBFS
+48V (per channel; individually settable)
NETWORK connector: 100Base-TX
[YDIF] connector: CAT5e or better Ethernet STP cable (Straight connected. All 8 pins must be connected.)
NETWORK connector: CAT5e or better Ethernet STP cable
Publicité
Table des Matières
