Adjust The Chest Strap; Check For Proper Fit; Back Lead Attachment; No-Pull Lead Attachment - Petsafe 3 in 1 Mode D'emploi

STEP 4

Adjust the Chest Strap

STEP 5

Check for Proper Fit

Back Lead Attachment

To use as a standard harness, attach your favourite lead to the
D-ring on the back of the harness. If your dog typically pulls on the
lead, he will likely continue to do so because of the "opposition
reflex". Opposition reflex is the reflex that causes sled dogs to pull
against pressure.

No-Pull Lead Attachment

To transition to the no-pull function, attach a nylon or leather 1m –
2m lead to the D-ring on the chest strap of the harness. We do not
recommend using a retractable lead with the no-pull function, as the
constant tension could encourage the dog to pull.
Although the harness may have an immediate impact on your dog's
pulling habits, and it may be more manageable to walk him, he may
still pull some while wearing it. The harness is designed to redirect your
dog from pulling and help achieve a loose lead walk. The front lead
Adjust the chest strap to a comfortable length. When fit
properly, the chest strap should be snug and should not
hang down off the dog's chest.
When fit properly, two fingers
should barely fit between the fur
and nylon strap. This prevents
movement and chafing.
www.petsafe.net
5