Viewing 3D Movies; Converting 2D Movies To 3D Movies For Viewing - JVC DLA-RS4810 Instructions

Viewing 3D Movies

Connect this unit to a 3D-compatible
HDMI device, and turn on the power
1
to play back the 3D video image
For details on how to play back 3D video images,
0
please refer to the instruction manual of the
player or recorder in use.
When 3D signals are received, the video image
0
switches automatically to the 3D format.
This unit supports the following 3D formats.
0
- Frame packing
- Side-by-side
- Top-and-bottom
In the default setting, "3D Format" is set to "Auto"
0
for automatic projection of 3D images.
If the image does not switch to 3D automatically
Press the [3D FORMAT] button on the remote
control
.

Converting 2D Movies to 3D Movies for Viewing

Press the [3D SETTING] button to
1
display "3D Setting"
.
Input Signal
> 3D Setting
3D Format Auto
2D to 3D conversion Off
Parallax
0
Crosstalk Cancel
0
Intensity 1
Sub Title Adjust Off
Exit Operate
MENU Select
Pressing the [3D FORMAT] button each time
0
switches the mode in the following sequence:
"Auto"""Side by Side"""Top and Bottom"
""2D"""Auto"...
Format
Auto
Side by Side
Top and Bottom
2D
Turn of the power of the 3D GLASSES
2
and put them on
The PK-AG1 powers on automatically.
0
Select "2D to 3D conversion" followed
2
by "On", and press the [OK] button
Press the [MENU] button to exit
3
MEMO
Depending on the movies, 3D effect may be less than
0
what you expected.
Back
BACK
Description
The format is detected and
configured automatically.
Select this setting if the 3D input
signal is of the side-by-side
format.
Select this setting if the 3D input
signal is of the top-and-bottom
format.
Select this setting if 2D images
are falsely recognized as 3D
ones.
35