Isotherm BI29 Dual Instructions Pour L'installation Et L'utilisation page 21

sprays of water. sprays of water.
WARNING! Install the product away from gas or LPG cylinders. WARNING! Install the product away from gas or LPG cylinders.
WARNING! The product must be installed in an area accessible for any WARNING! The product must be installed in an area accessible for any
maintenance. The housing space of live parts and of the condensing unit/compressor maintenance. The housing space of live parts and of the condensing unit/compressor
must only be opened voluntarily and not directly accessible. must only be opened voluntarily and not directly accessible.
WARNING! The compressor/condensation unit installation area must be WARNING! The compressor/condensation unit installation area must be
made with a material resistant to the needle-flame test required by standard EN made with a material resistant to the needle-flame test required by standard EN
603335---1 or else be more than 5 cm from electrical and/or electronic components. 603335---1 or else be more than 5 cm from electrical and/or electronic components.
WARNING! If there is a battery charger, it must be connected to the battery WARNING! If there is a battery charger, it must be connected to the battery
and never directly to the product. and never directly to the product.
WARNING! The product must be protected against indirect contact in WARNING! The product must be protected against indirect contact in
accordance with the "Heavy Current Regulations". accordance with the "Heavy Current Regulations".
WARNING! In case of power connection from AC mains, to avoid the risk WARNING! In case of power connection from AC mains, to avoid the risk
of serious personal injury, ensure that it is equipped with cut-off devices (switches) of serious personal injury, ensure that it is equipped with cut-off devices (switches)
which permit total disconnection of the product current and protective devices which permit total disconnection of the product current and protective devices
which automatically intervene in the event of malfunction. which automatically intervene in the event of malfunction.
WARNING! Never touch any damaged or non-insulated electrical cables WARNING! Never touch any damaged or non-insulated electrical cables
while the electrical power supply is enabled. This observation is particularly true while the electrical power supply is enabled. This observation is particularly true
when the product is connected to 115Volt or 230Volt. when the product is connected to 115Volt or 230Volt.
20
User Manual