Optical Digital Output - Arcam CD17 Manuel D'utilisation

Power inlet
Connect the correct
POWER INLET
mains cable here.
110-120V 60Hz
230-240V 50Hz
Voltage select
Ensure the voltage selected
matches the local power supply.
Connect these to your amplifier's CD or other
line-level input using suitable high quality
interconnect cables. Ensure that the left and
right audio outputs from the CD player are
connected to the same left and right inputs on
The second set of sockets can be used to connect
to a second amplifier set up for multi-room use.
L
VOLTAGE SELECT
R
1 2
110-120V/230-240V ANALOGUE AUDIO OUT
Analogue audio outputs
your amplifier.
COAXIAL OPTICAL
DIGITAL AUDIO OUT

Optical digital output

Use this socket if you are using a separate DAC
or digital recorder with an optical connection.
Connect using a suitable optical cable.
Coaxial digital output
Use this socket if you are using a separate digital
to analogue converter (DAC) or digital recorder.
Connect to the DAC or recorder's digital input
using a suitable 75 screened cable.
Ω
CAUTION: Never connect the digital output
socket to a conventional audio input.
E-5