Samsung RB12J Série Mode D'emploi page 47

DA68-03174Z-02.indb 47
16. Change the direction of the door wiring
to the opposite side.
( 1 ) Connect the wire, and then insert it
into the Control Cover.
( 2 ) Insert the wire into the Hinge
Cover. (Make sure the white band
on the wire is secured to the Hinge
Cover hook.)
( 3 ) Fold the fixer (as shown in the
illustration below) so the wiring
does not disassemble.
17. Insert the wiring between ribs of
the Hinge Cover as shown in the
illustration.
CAUTION
Be careful not to damage the wiring.
English 47
2016. 3. 31. 9:52