Completing The Setup - Samsung RB12J Série Mode D'emploi

Setting up your Refrigerator

Completing the Setup

Now that you have your new refrigerator
installed and in place, you are ready to
set up and enjoy the full features and
functions of the appliance.
By completing the following steps, your
refrigerator should be fully operational.
24 English
DA68-03174Z-02.indb 24
If the refrigerator does not operate, first
check the power plug and your fuse or
circuit breaker box. If that does not resolve
the issue, consult the troubleshooting
section at the back of this user guide.
If you have any further questions, contact
a Samsung Electronics service center.
1. Confirm the refrigerator in an
appropriate location with reasonable
clearance between the wall and the
refrigerator.
Refer to installation instructions in this
manual.
2. Once the refrigerator is plugged in,
make sure the interior light comes on
when you open the doors.
3. Set the temperature control to the
coldest temperature and wait for an
hour.
The freezer should get slightly chilled
and the motor should run smoothly.
4. After you plug in the refrigerator, it
will take a few hours to reach the
appropriate temperature.
Once the refrigerator temperature is
sufficiently cool, you can store food and
drink in the refrigerator.
After you plug in the refrigerator, the
refrigerator chime will sound.
Press the Freezer or Fridge button to
turn the chime off.
2016. 3. 31. 9:52