Declaration Of Conformity - Dreve Dentamid Polymax 1 Mode D'emploi

Polymax 1, 1 / 120 °C, 3 and 5

3. Declaration of conformity

3.1 Polymax 1
Low Voltage Directive (2014 / 35 / EU).
We herewith declare that the machine described below is in its conception and design and
in the shape delivered by us in accordance with the fundamental requirement for safety and
health as prescribed in the applicable EEC-guidelines.
In case of any change or modification of the machine not authorised by us this declaration
becomes invalid.
Denomination of the machine: Polymax 1 / 95 °C
D3429 / D3429A / D34291 / D34291A
Type of machine: Pressure polymerisation unit
Applicable EC directives:
2014 / 35 / EU Low Voltage Directive
2014 / 30 / EU EMC Directive
Applied harmonised standards:
2014 / 35 / EU Low Voltage Directive
EN 61010-1: 2010 Safety requirements for electrical equipment for
measurement, control and laboratory use – Part 1; General
requirements (IEC 61010-1:2010 + Cor.: 2011); German
version EN 61010-1:2010.
EN 61010-2-010: 2014 Safety requirements for electrical equipment for
measurement, control, and laboratory use – Part 2-010:
Palticular requipements for laboratory equipment for the
heating of materials (IEC 61010-2-010:2014); German
version EN 61010-2-010:2014.
2014 / 30 / EU EMC Directive
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) – Part 3-2: Limits –
Limits for harmonic current emissions (equipment input
current <= 16 A per phase) (lEC 61000-3-2:2014);
German version EN 61000-3-2:2014 .
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) – Part 3-3: Limits –
Limitation of voItage changes, voltage fluctuations and
flicker in public low-voltage supply systems. for equipment
with rated current <= 16 A per phase and not subject to
conditional connection (IEC 61000-3-3:2013); German
version EN 61000-3-3:2013.
EN 61326-1:2013 Electrical equipment for measurement, control and
laboratory use – EMC requirements Part 1. General
requirement (IEC 61326-1:2012); German version EN
61326-1:2013 Emission according to living area, business
and industrial undertakings as well as small enterprises
interference stability according to industrial area.
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-40 · Fax: +49 2303 8807-55 · dentamid@dreve.de · www.dreve.com/dentamid
32
3.2 Polymax 1/120 °C
Low Voltage Directive (2014 / 35 / EU).
We herewith declare that the machine described below is in its conception and design and
in the shape delivered by us in accordance with the fundamental requirement for safety and
health as prescribed in the applicable EEC-guidelines.
In case of any change or modification of the machine not authorised by us this declaration
becomes invalid.
Denomination of the machine: Polymax 1 / 120 °C
D3428 / D3428A / D34281 / D34281A
Type of machine: Pressure polymerisation unit
Applicable EC directives:
2014 / 35 / EU Low Voltage Directive
2014 / 30 / EU EMC Directive
Applied harmonised standards:
2014 / 35 / EU Low Voltage Directive
EN 61010-1: 2010 Safety requirements for electrical equipment for
measurement, control and laboratory use – Part 1;
General requirements (IEC 61010-1:2010 + Cor.: 2011);
German version EN 61010-1:2010.
EN 61010-2-010: 2014 Safety requirements for electrical equipment for
measurement, control, and laboratory use – Part 2-010:
Palticular requipements for laboratory equipment for the
heating of materials (IEC 61010-2-010:2014); German
version EN 61010-2-010:2014.
2014 / 30 / EU EMC Directive
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) – Part 3-2: Limits –
Limits for harmonic current emissions (equipment input
current <= 16 A per phase) (lEC 61000-3-2:2014);
German version EN 61000-3-2:2014.
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) – Part 3-3: Limits –
Limitation of voItage changes, voltage fluctuations
and flicker in public low-voltage supply systems. for
equipment with rated current <= 16 A per phase and
not subject to conditional connection (IEC 61000-3-
3:2013); German version EN 61000-3-3:2013.
EN 61326-1:2013 Electrical equipment for measurement, control and
laboratory use – EMC requirements Part 1. General
requirement (IEC 61326-1:2012); German version EN
61326-1:2013 Emission according to living area, business
and industrial undertakings as well as small enterprises
interference stability according to industrial area.
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-40 · Fax: +49 2303 8807-55 · dentamid@dreve.de · www.dreve.com/dentamid
33