Connecting To A Tv - Coby Snapp CAM4505 Série Manuel D'instruction

Connecting to a Tv

Â
To view your video and photo files on a bigger
screen, use the included A/V cable to connect
your camcorder to a television.
1. Locate the Composite Video input connec-
tors on the TV.
—
Connect the cable's yellow RCA plug to
the Composite Video In jack of the TV.
—
Connect the cable's white RCA plug to
the white Audio In jack of the TV. (The
red jack is unused.)
2. Turn the camera on. Connect the cable's
mini plug to the A/V output jack located on
the bottom of the camcorder. The camcord-
er's screen will turn off automatically.
3. Turn on the TV. Set the TV's input source
mode to display the composite video signal.
When the TV source mode is set properly,
you will see the camcorder's display on the
TV screen.
Connecting To A Tv Connecting To A Tv
4. Press <MODE> on the camera to place it
Review mode. Use the review mode controls
to play videos or view photos on the TV.
Please refer to the documentation provided with
your TV If you need help setting its input source
mode.
Please refer to the documentation pro-
vided with your TV If you need help
setting its input source mode.
The Video Out format of the camcorder
can be changed in the System Settings
menu. By default, the camcorder is set
to be used in North America (NTSC
format, 60 Hz refresh rate).
For more information, please refer to
the section "Setting the System Op-
tions".
Page 33 Page 33